Author Archives: Randy

Unknown's avatar

About Randy

Airline Captain, USCG 100 ton Master with Radar and Towing Endorsements, former “Coastie”

Hurricane Matthew heading towards Haiti

Phew, that was close! – by Randy

When we last posted, Tropical Storm Matthew was just northeast of Grenada, headed west. Thankfully, Grenada did not experience a direct hit. Matthew skirted just north of Grenada as a Tropical Storm with maximum winds of 60 knots before exploding into a category 4/5 major hurricane on the Saffir/Simpson scale (so far maximum sustained winds have reached 165 knots with gusts to 195 knots). Our preparations were more than adequate for the weather we experienced from the outer bands of the Tropical Storm and we are now breathing a sigh of relief as we watch what has become a massive storm march relentlessly toward Haiti, Jamaica, Cuba and other points north that are not yet clearly defined. Our good wishes and prayers are with our many friends both aboard boats and ashore that are potentially still in the crosshairs of Matthew.

Category 4 Hurricane Matthew

Category 4 Hurricane Matthew

Pilots Discretion being hauled at Spice Isle Marine, Grenada

Pilots Discretion being hauled at Spice Isle Marine, Grenada

We did not want to move on without sharing our experience addressing what should have been routine maintenance for the Pilots’ Discretion. We generally haul our boat out of the water every other year to refresh the bottom paint on the hull. Due to the fact that Pilots’ Discretion lives in a salt water environment, she over time will build up a layer of marine growth on her hull that left unaddressed, results in excessive parasite drag, which in turn reduces her range and increases our fuel bill (ouch). The way that we minimize this is a combination of elbow grease, in the form of a diver cleaning the growth off the bottom (now you guys know why we

Micron 66 and Propspeed

Micron 66 and Propspeed

decided to teach Ryan to dive!) and the application of very expensive, yet effective anti fouling paint to the hull. The only way to accomplish the painting portion of this strategy is to haul the boat, which brings us to the entertaining part of the story that begins at Spice Island Marine boat yard.

Spice Island Marine is one of two major boat yards in Grenada equipped to handle boats of our size and larger. Since renewing the bottom paint is essentially a calendar driven event, we have been planning for this since last summer. We actually made our reservation for haul out months before we arrived in Grenada. The regularly scheduled haul out maintenance generally takes 3-4 days so to be safe we made a plan for 5 days.  The week before we were scheduled for haul out, I made an appointment with the management at Spice Island Marine to go over the specific details of our maintenance to do list as well as to confirm what would be expected from both boat yard staff and Pilots’ Discretion crew upon our arrival at the Travel Lift that would remove Pilots’ Discretion from the water in Prickly Bay, Grenada.

To make sure that we were in position at the appointed hour (originally 9 a.m.), we took Pilots’ Discretion on a short 7 nautical mile cruise from Port Louis Marina southeast to Prickly Bay the night before. We moved our boat in company with our friends on M/V Seamantha, a Krogen 58 who were scheduled to be hauled just before us at 8 a.m. the next morning. We settled in for a nice evening sunset in Prickly Bay, looking forward to our scheduled morning haul out.

Our first indication that things were not going according to schedule came when we got a call on the radio from Seamantha around 8 a.m. telling us that they were going to be delayed being hauled out by about an hour due to boat yard scheduling issues. They told us that a boat had shown up, unscheduled just as the sun set and had positioned himself in the slip where the Travel Lift works to remove boats from the water. The unscheduled arrival announced that since he was a “regular” that he did not need an appointment and Seamantha would just have to wait (along with everyone scheduled after her). After much chatter back and forth on the radio, the boat yard told us that we would be rescheduled to be hauled at 11 a.m. and they would give us a 15 minute heads up to position ourselves off the slip for haul out. Having heard nothing from the boatyard by 11:50 a.m., I called them to inquire about our status. They politely said, “we are sorry, we meant to call you, you can come on in now.” OK, all’s well that ends well.

We undid our mooring lines and idled the 1/4 mile to the haul out slip. As soon as we positioned our boat in the slip, the yard foreman came out and inquired what we were doing in the slip as he was scheduled to launch a boat at 1 p.m. and we would have to wait. I politely explained to him that he must be confused since we in fact were scheduled to be hauled out at 9 a.m. and since it was now after 12 noon, we were going to do our best to help him get back on schedule. I also explained to him that the Pilots’ Discretion would only be leaving the slip one way and that was by Travel Lift to be placed on her maintenance stands. Now you see, we are getting off to a bad start with a guy who would soon be my new best  pal.

After a whole bunch of grousing, my new pal correctly came to the conclusion that it would be in our mutual best interest if he spoke less and hauled more. Pilots’ Discretion was safely secured in her maintenance blocks just after 3 p.m. Did I mention to you that the yard closes at 4 p.m. and it was becoming apparent that the yard crew begins to prepare for that event about 3 p.m. Day 1 in the yard slips by with little work to show for it. On day 2, we were unable to be at the boat yard in the morning as “Patton,” our 14-year-old Cocker Spaniel, had a series of appointments at the St. George’s University veterinary clinic. Fortunately, the crew from Seamantha stood in for us at the boat yard to see that work began on Pilots’ Discretion. When we arrived at the yard mid afternoon, the preparation and painting process was well underway.

Sanding and painting the bottom

Sanding and painting the bottom

Day 3 began with the arrival of additional outside contractors that we needed to address some minor electrical issues (we were adding a replacement underwater light for our transom as well as changing our bow thruster from its original design 3 bladed propeller to a new, more efficient 6 bladed design). Zinc plates were replaced and the anchor chain painted and marked. At the end of the day, it appeared doubtful that we would complete the project in the planned 4 days. Did I mention that we were hauled on a Tuesday, now we are coming up on the weekend.

Propspeed looks good, but the new LED underwater light casing still needs anti-fouling paint

Propspeed looks good, but the new LED underwater light casing still needs anti-fouling paint

 

Bottom paint nearly done, now to get under those chock blocks!

Bottom paint nearly done, now to get under those chock blocks!

Friday was spent adding the second coat of 3 planned coats of bottom paint. Given that each coat of paint must be allowed to adequately dry prior to the next coat being applied it was becoming impossible to launch before the weekend. What the heck, it is only money and the view from our temporary home at Mt. Cinnamon resort was spectacular! We will be in the water Monday for sure.

After a weekend of rest, everyone arrived back at the boatyard refreshed and ready to accomplish great things. My new best pal proudly walked me around Pilots’ Discretion to show me what a fine job they had done.

When I mentioned to him that the dinghy lift had been stripped to bare metal but had not been repainted he feigned surprise and said ” you wanted us to paint that too?” “Yes we did,” and did I mention that in addition to not painting things that did need painted, they did manage to paint a lot of places that were not supposed to be painted. After another trip to the front office and much grousing, it was determined that we were actually the customer and if we did not think the job was complete, the job was not complete. In the end, we got all of our issues addressed adequately.

It was not easy and the process ended up taking 8 days instead of the usual 4 but Pilots’ Discretion is back in the water. Next stop, additional electrical system modifications and a complete overhaul of the boat’s sanitation system. Did I mention that maintaining Pilots’ Discretion at times feels like a full-time job?

Invest 97L track

We were going to write about our experience at the boat yard but the very real likelihood of an encounter with a tropical weather system has changed all of that! – by Randy

We shared our great experience at Mount Cinammon Resort while our boat was being hauled in our last post. Our plan was to utilize this post to share our experiences with the boat yard. Sometimes the best laid plans have to be altered due to some unforeseen event. What will likely become Huricane Matthew in the next week is just such an unexpected surprise for folks in the Southern Caribbean.

Tropical Storm Matthew approaching the eastern Caribbean

Tropical Storm Matthew approaching the eastern Caribbean

This time of year, the West Coast of Africa spits off massive amounts tropical energy known as waves and a lot of these waves develop into tropical storms. Due to a number of meteorological reasons, most of the systems that turn into tropical storms make a more northward turn towards the Greater Antilles chain of islands, leaving folks like those of us in Grenada in the clear. Not so this time! The best forecast models available are showing that what the National Hurricane Center is now calling Invest 97L will likely develop into Hurricane Matthew. They are predicting a track that will place it just slightly north of Grenada when he passes.

Invest 97L approaching the Lesser Antilles

Invest 97L approaching the Lesser Antilles. We are right in the predicted cross hairs

The hurricane experts are estimating that Matthew will not gain hurricane strength until after he is northwest of the Spice Island. That is good news for us but it is by no means a certainty so all of the prudent mariners in our neighborhood are kicking their hurricane preparations into high gear. A number of Mega Yachts, including Steve Jobs’s 257′ “Venus,” have arrived today with an unscheduled stop at the Port Louis Marina seeking the security of the most stoutly constructed docks within several hundred miles.

Ronan & Ryan in front of Venus, Port Louis Marina, Grenada

Ronan & Ryan in front of Venus, Port Louis Marina, Grenada

For our part, we have taken our antennas down, added additional mooring lines and fenders, taken our dinghy out of the water and secured it to our tender lift with multiple stainless steel straps.

Preparing for the storm

Preparing for the storm

Once we accomplished all of that, we had drills to make sure the entire crew knows the routine to get off the boat safely should the need arise when the weather system arrives. As this is being written at 3:45pm, the weather has begun a subtle change. It has been unusually hot and still today with very light breezes. Just in the last hour or so the breezes have begun to stiffen, making it extra challenging for all of the last minute arrivals as they are trying to maneuver into the remaining open slips to ride out the storm.

Port Louis Marina staff wrestling with arriving sailboat as the winds pick up

Port Louis Marina staff wrestling with arriving sailboat as the winds pick up

We will post a follow up to our story as conditions and opportunity allows.

 

Improvise, adapt and overcome! (by Randy)

Vessel Vanguard

Vessel Vanguard

GENERAL MAINTENANCE

We have been utilizing our boat as our floating home for over a year now. In addition to living aboard her, we have travelled approximately 3600 nautical miles since we left Florida. One of the constant and ongoing requirements for an active vessel at sea is a rigorous maintenance program. We have been utilizing the Vessel Vanguard program to track our ongoing maintenance and it has proven very helpful. We have access to an interactive website that follows all of the routine maintenance schedules for the Pilots’ Discretion. It provides us alerts to upcoming maintenance as well as maintaining a parts inventory and equipment utilization records for all of the various systems aboard. We have tried to be very proactive in anticipating the potential for equipment failure and it’s implications for our operational readiness.

Despite our diligent attention to the Pilots’ Discretion maintenance, occasionally we are confronted with an unanticipated requirement for technical support. Usually, it turns out that we need to find a part in an out of the way spot or get a second opinion on some minor equipment malfunction. A couple of days later we are on our way with the offending system back on line.

DINGHY ISSUES

During our passage from St. Kitts to Antigua, we encountered a potentially catastrophic failure with our dinghy. We took the dinghy to shore in Majors Bay, St. Kitts for Patton’s morning walk and I noticed that the fuel gauge moved very quickly from full to nearly empty in the course of 20 minutes (we had just fueled the dinghy). In addition, the smell of gasoline was extremely strong and upon inspection, the bilge had two inches of raw gasoline floating in it. Anyone with any boating experience knows that gasoline in the bilge creates a very hazardous and potentially explosive situation. I checked all of the fuel lines throughout the boat and motor and could find no leaks. We elected to drain the bilge, clean it out as best we could and bring the dinghy aboard, not to be run again until we found some competent help to track down and repair our mysterious fuel leak.

Ryan, Randy & Patton securing the dinghy in Majors Bay, St. Kitts

Ryan, Randy & Patton securing the dinghy in Majors Bay, St. Kitts

We communicated with our cruising friends,  John and Paulette Lee aboard M/V Seamantha (via our Delorme satellite communications system) and they volunteered to do some online research regarding options for us for our arrival in Antigua. Before we had Antigua on the radar,  John had gotten back to us with the recommendation that we contact the folks at Seagull Inflatables (www.seagullinflatables.com) in Falmouth Harbor, Antigua.

 

Seagull Inflatables, Falmouth Harbor, Antigua

Seagull Inflatables, Falmouth Harbor, Antigua

As soon as we had the Pilots’ Discretion safely secured at Nelson’s Dockyard, I reached out to Seagull Inflatables owner, Mr. Dino Bruschi, and explained our issue. Dino told me he would be at our boat within an hour to evaluate and advise. True to his word, Dino was onboard Pilots’ Discretion and hard at work evaluating our fuel leak within the hour. The bad news was that he felt the integral aluminum fuel tank had failed. Ordinarily, that would not be a big deal but the engineering drawings of our dinghy showed that the tank had been put in place with no access points for maintenance. In fact, the tank had been installed and then fiber glassed in place. The net result to us was that the only way to access the tank was to literally cut it out of the boat. This was going to be major surgery for our dinghy with it’s still shiny new 40hp Yamaha outboard. I was having visions of the entire thing ending up on a scrap heap in Antigua. To his credit, Dino was not quite as pessimistic as I was. He assured me that he had a first rate shop and could complete the repair in a fashion that would meet our requirements and our budget.

The gas tank was sealed beneath the fiber glass & had to be cut out

The gas tank was sealed beneath the fiber glass & had to be cut out

Once the suspect fuel tank was removed, we found the source of our mysterious fuel leak. The fuel tank had been part of the boats electrical bonding system (a robust bonding system prevents a condition known as galvanic corrosion, a form of corrosion of metals that can present itself in the marine environment anytime salt water and electrical current are present) Somewhere along the way, the bonding strap that was attached to the fuel tank broke off.

The bonding strap on the fuel tank was missing which caused galvanic corrosion to occur

The bonding strap on the fuel tank was missing which caused galvanic corrosion to occur

Once that occurred, it was just a matter of time before galvanic corrosion would take its toll on the aluminum tank.

A tiny little hole in your gas tank can really ruin your day!

A tiny little hole in your gas tank can really ruin your day!

We found the corrosion holes, replaced the tank and installed a more robust bonding attachment to the new tank. After all of this, the magicians at Seagull Inflatables still had to reconstruct our tender in a way that was both cosmetically flawless and resulted in a stronger boat than we had arrived with. Throughout the process, Dino was diligent about communicating with me 3 or 4 times a day to make sure that I had the opportunity to participate fully in the development and implementation of the repair. Our dinghy is once again operational and if I do not show you the improved structure around the fuel tank, you would not be able to tell that there had ever been a problem. We cannot say enough good things about the way the folks at Seagull Inflatables go about their business. Thank you Dino and crew for an outstanding repair on short notice. For any fellow cruisers that require any attention to their tender or safety equipment while in Antigua, we would urge you to contact the folks at Seagull Inflatables. Dino can be reached on his cell at 1 (268) 725-4466. Thanks again Dino for a first rate repair.

Randy polishing the dinghy

Randy polishing the dinghy

Technical Services in the British Virgin Islands – by Randy

Given that the BVIs lie approximately half way between Florida and Grenada, it is a logical place to plan to stop to attend to the inevitable maintenance issues that come up on a cruising boat. We have encountered several mechanical issues that required the help of well qualified technicians both on our way south last year and again this month as we cruised the British Virgin Islands. As has been our policy in the past, we are not going to focus on the vendors that we have encountered that did less than satisfactory work but rather provide you recommendations for companies and individuals that we have found to be both honest and competent.

Welding and Westerbeke Genset

Our list of reputable firms in the BVI has to begin with BVI Marine Management in Nanny Cay. Mr. Tim Brown is the Service Manager there and he is a tremendous resource to call upon if you need anything boat maintenance related. We utilized BVI Marine Management to do some stainless steel fabrication and welding last year when we were redesigning our tender lift to better deal with the sometimes rough conditions that we have encountered in the Caribbean. Additionally, they have helped us obtain parts for our Westerbeke Genset (BVI Marine is a Westerbeke authorized dealer). BVI Marine Management can be contacted at (284) 494-2938.

Cummins QSM 11s

Sanchez Christopher

Sanchez Christopher

When we arrived in the BVI earlier this month, we needed to have some work done on our main engine heat exchangers and after coolers. I called Tim Brown at BVI Marine Management and asked if they could do the work and he informed me that they did not have the capacity to work on QSM 11s but he had a solid recommendation. I was referred to John, the Service Manager at Parts and Power, in Road Harbor, Tortola, (284) 494-2830. Again, we were dealt with honestly and the work performed was excellent and more than met our expectations. The technician assigned to our boat was Mr. Sanchez Christopher.  Sanchez is a very knowledgable and hardworking diesel mechanic and it was a pleasure working with him.

Air conditioning and Refrigeration

Our final recommendation for the BVI is Mr. Alfred August , Manager at Marine Cooling Systems. If you have any refrigeration or cooling issues while in the BVI, Alfred is the guy to call. Alfred can be reached at (284) 441-6556 or email at marinecoolingsystems@gmail.com.

We recognize that there are many other well qualified technicians in the BVI and this list is in no way intended to be all inclusive. We have always felt more comfortable calling on someone whom we have had a favorable recommendation from a fellow cruiser; someone who understands the lifestyle and the resulting demands on our mechanical systems aboard our floating home. If our recommendations can provide you with that little bit of extra comfort factor while trying to address mechanical issues in unfamiliar territory, we are happy to help out. We will keep our list updated as we establish relationships with other vendors and technicians along the way.

Cane Garden Bay, British Virgin Islands

Mad Dash for the British Virgin Islands, 9 Countries in 6 Days – by Randy

Underway

Underway

We had a great time in St. Lucia, we got a lot accomplished and look forward to returning in the future. Unfortunately, the various delays that we encountered in St. Lucia, waiting on parts and technicians left us with our scheduling backs against the wall. We had plans for meeting our good friends Mike Cleary, Bridget Finnegan, and Mike’s daughter Madison in the BVIs. They had a Sunsail sailboat chartered in Tortola beginning on February 19, so when we literally dropped the solar panel technician on the fuel dock in St. Lucia on the morning of February 13th, we knew we had some serious real estate to cover to be 350 miles north in just six days. During our dash north we cruised through the territorial waters of St. Lucia, Martinique, Dominica, Montserrat, Guadeloupe, St. Kitts, Nevis, Statia, St. Marteen and finally the British Virgin Islands. Wow, I am tired just writing about it.

Most of the trip was run in seas of 4-6 ft, with a few periods of 8-9 ft, and even a day with the Caribbean Sea as smooth as a small mountain lake. Our speed averaged 8-10 knots but when we had the opportunity, we ran as high as 25 knots to keep the scenery moving. We have visited all of the countries we just mentioned during our trip south last year so although we are disappointed that we had to hustle through these countries to meet our friends, it was worth it to get to be in the BVI with friends that are virtually like family to us.

Norman Island (The Bight) and North Gorda Soud

Bridget, Madison & Mike, Bubbly Pool, Jost Van Dyke, BVI

Bridget, Madison & Mike, Bubbly Pool, Jost Van Dyke, BVI

Once in the BVI we began our trip by heading off to the Bight on Norman island. A mandatory stop at the infamous Willie T floating bar and grill was followed by a trip to Gorda Sound, Virgin Gorda, and Jost Van Dyke.

We followed that up with a two day trip to Anegada, then over to Marina Cay and The Baths.

Anegada

Marina Cay

The Baths

After that whirlwind, we capped the Cleary clan’s trip to the BVI by meeting our cruising friends Jeff and Izzy Rogers for an evening of good food, conversation and music in one of our favorite spots in the BVI, Cane Garden Bay.

Cane Garden Bay, British Virgin Islands

Cane Garden Bay, British Virgin Islands

Our friends have gone home and it is time for our adventure to continue. It occurs to me that this nomad lifestyle works well for our family. I have an idea, I think we should keep this trip going. We will discuss it at dinner tonight and I will get back to you. For now, keep following our progress as our  life adventure continues …